Skip to main content

Menu trees

Figure-26---Menu-overview.png

Figure-27-user-options-menu.png

Figure-28-setup-menu.png

Figure-29-diagnostics-menu.png

For convenience, all menu items are summarised below together with references to the sections in this manual where details can be found.

USER OPTIONS

USER OPTIONS

menu contents reference
option2.png FLUID TEMPERATURE temperature monitor 4.1
option2.png FLUID DENSITY density monitor 4.2
option2.png TEMP CORRECTION temperature correction 4.1.1
option2.png AVERAGING FILTER output averaging 4.3
option2.png TRANSIENT FILTER output spike filter 4.4
option2.png VL SCALING dynamic output scaling factors 4.5
option2.png VN SCALING kinematic output scaling factors
option2.png PRESS CORRECTION pressure correction 4.6

FLUID TEMPERATURE

item contents reference
option2.png SOURCE temperature input source 4.1
option2.png KEYPAD keypad-entered temperature
VP I/P external temperature value
TRANSDUCER transducer PRT measurement
IN-USE temperature value being used

FLUID DENSITY

item contents reference
option2.png SOURCE density input source 4.2
option2.png KEYPAD keypad-entered density
D LIVE measured density
IN-USE density value being used

TEMP CORRECTION

item contents reference
VL current “live” viscosity 4.1.1
VLT temperature-corrected viscosity
TEMP temperature value being used
option2.png REF-T reference temperature
option2.png TCF temperature correction factor

AVERAGING FILTER

item contents reference
VL-INST live viscosity 4.3
VL-AVG averaged viscosity
option2.png AVG-NO averaging number

TRANSIENT FILTER

item contents reference
VL-INST live viscosity 4.4
VL filtered live viscosity
option2.png TOLERANCE acceptance limits
SHOCKS number of readings rejected

VL SCALING

item contents reference
V-RAW calculated dynamic viscosity 4.5
VL current “live” dynamic viscosity
option2.png SPAN scaling factor
option2.png OFFSET viscosity offset

VN SCALING

item contents reference
VN-RAW calculated kinematic viscosity 4.5
VN current “live” kinematic viscosity
option2.png SPAN scaling factor
option2.png OFFSET viscosity offset

PRESS CORRECTION

item contents reference
VL current “live” viscosity 4.6
VLT temperature-corrected viscosity
VLTP temperature- and pressure-corrected viscosity
PRESS measured pressure
option2.png REF-P reference pressure
option2.png PCF correction factor
SETUP

SETUP

menu contents reference
option2.png TRANSDUCER SETUP standalone configuration 3.2
option2.png VP SETUP VP550 configuration 3.3
option2.png DIAGNOSTICS performance monitor 5
option2.png TRANSDUCER CAL calibration constants 4.5

TRANSDUCER SETUP

item contents reference
option2.png INPUTS temp and density input selection 3.2.1
option2.png 4-20mA OUTPUT analogue output 3.2.2
option2.png SERIAL DATA OUTPUT RS485 comms 3.2.3

TD INPUTS

item contents reference
option2.png T SOURCE temperature input selection 3.2.1

TD 4-20 mA OUTPUT 1

item contents reference
option2.png D VARIABLE parameter to output 3.2.2
option2.png 4 mA minimum (4 mA) setpoint
option2.png 20 mA maximum (20 mA) setpoint

TD 4-20 mA OUTPUT 2

item contents reference
option2.png D VARIABLE parameter to output 3.2.2
option2.png 4 mA minimum (4 mA) setpoint
option2.png 20 mA maximum (20 mA) setpoint

TD SERIAL SETTINGS

item contents reference
option2.png ADDR transducer address 3.2.3

VP SETUP

item contents reference
option2.png UNITS DISPLAY select units and resolution 3.3.1
option2.png DENSITY INPUT select density input source 3.3.2
option2.png TEMP INPUT select temperature input source 3.3.3
option2.png RELAYS relay trip levels 3.3.4
option2.png SERIAL SETTINGS serial comms 3.3.5
option2.png 4-20mA OUTPUT 1 analogue outputs
3.3.6
option2.png 4-20mA OUTPUT 2
option2.png 4-20mA OUTPUT 3
option2.png PRESS INPUT select pressure input source 3.3.7
option2.png USB SETTINGS USB link 3.3.8

UNITS DISPLAY

item contents reference
option2.png Main Unit select dynamic/kinematic viscosity 3.3.1
option2.png VL dynamic viscosity units
option2.png VN kinematic viscosity units
option2.png T temperature scale
option2.png Resolution no of decimal places

VP DENSITY INPUT

item contents reference
option2.png D SOURCE density input source 3.3.2
D LIVE measured density
CURRENT actual input current
option2.png D 4 mA minimum (4 mA) setpoint
option2.png D 20 mA maximum (20 mA) setpoint

VP TEMP INPUT

item contents reference
option2.png T SOURCE temperature input source 3.3.3
T LIVE measured temperature
CURRENT actual input current
option2.png T 4 mA minimum (4 mA) setpoint
option2.png T 20 mA maximum (20 mA) setpoint

RELAYS

item contents reference
option2.png PV process variable 3.3.4
option2.png LO-LIM minimum trip level
option2.png HI-LIM maximum trip level

VP SERIAL SETTINGS

item contents reference
option2.png ADDR VP550 address 3.3.5
option2.png Mode Modbus ASCII/RTU or "print"

VP 4-20 mA OUTPUT 1

item contents reference
option2.png VP VARIABLE select output variable 1 3.3.6
option2.png 4 mA minimum (4 mA) setpoint
option2.png 20 mA maximum (20 mA) setpoint

VP 4-20 mA OUTPUT 2

item contents reference
option2.png VP VARIABLE select output variable 2 3.3.6
option2.png 4 mA minimum (4 mA) setpoint
option2.png 20 mA maximum (20 mA) setpoint

VP 4-20 mA OUTPUT 3

item contents reference
option2.png VP VARIABLE select output variable 3 3.3.6
option2.png 4 mA minimum (4 mA) setpoint
option2.png 20 mA maximum (20 mA) setpoint

VP PRESS INPUT

item contents reference
option2.png P SOURCE pressure input on/off 3.3.7
option2.png P KEYPAD keypad-entered pressure value
P IN-USE pressure value being used
CURRENT actual input current
P LIVE measured pressure
option2.png P 4 mA minimum (4 mA) setpoint
option2.png P 20 mA maximum (20 mA) setpoint

VP USB SETTINGS

item contents reference
option2.png ADDR VP550 address 3.3.8
option2.png Mode Modbus ASCII/RTU or “print”

DIAGNOSTICS

item contents reference
option2.png SYSTEM ALARMS internal alarms 5.5
option2.png TRANSDUCER RAW raw data

5.3
option2.png TRANSDUCER ID transducer data
option2.png TRANSDUCER TELEM transducer telemetry 5.6
option2.png VP ID VP550 data  5.3
option2.png VP TELEMETRY VP550 telemetry  5.6
option2.png USB TELEMETRY USB telemetry 5.7

SYSTEM ALARMS*

item contents reference
TD Restart alarm messages
for diagnostic purposes only		 5.5
TD E2 FAIL
TD F2 READ
TD F3 READ
TD PRT READ
TD PRT DATA
TD CALCS
VP RESTART
VP E2 FAIL
TD TELEMETRY
VP PRT READ
VP PRT DATA
VP PCF CALC
VP ADC TEMP
VP ADC DENS
VP ADC PRESS
VP POWER

*Note: only the active alarm(s) will be shown. If no alarm is active, display will show: < NO ALARMS >

TRANSDUCER RAW

item contents reference
L loss factor 5.3
F transducer resonant frequency
DF frequency difference
R PRT resistance
T COUNT PRT counts
VLi “instantaneous” live viscosity
VLTi “instantaneous” temperature-
corrected viscosity
D density
SHOCKS transducer shock count

TRANSDUCER ID

item contents reference
option2.png SER_No transducer serial number 5.3
option2.png SW_Ver transducer software version
option2.png CODE transducer code

TRANSDUCER TELEM

item contents reference
STAGE process stage 5.6
Tx transmitted to transducer
Rx received from transducer

VP ID

item contents reference
option2.png SER_No VP550 serial number 5.3
option2.png SW_Ver VP550 software version
option2.png CODE1 VP550 codes
option2.png CODE2
option2.png CODE3

VP TELEMETRY

item contents reference
STAGE process stage 5.6
Rx received from host
Tx transmitted to host

USB TELEMETRY

item contents reference
STAGE process stage 5.7
Rx received from host
Tx transmitted to host

CONSTANTS

item contents reference
option2.png P30 calibration constants

NOTE:
These parameters must not be changed unless specifically advised by Hydramotion		 4.5
option2.png P31
option2.png P32
option2.png P33
option2.png P34
option2.png P35
option2.png P36

Related articles